background image

25

Special menu setting [SPECIAL SETUP] 

The special menu setup is performed including the setting of the camera image quality and the communication configuration when a 
receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. 
Refer to page 5 for how to call up the screen. 

20. Chroma level adjustment [CHROMA GAIN] 

Press the [RIghT] or [LEfT] button to adjust the color density of the camera image. When the level indicator moves in the "+" 
direction, the color becomes deeper, and when the level indicator moves in the "–" direction, the color becomes lighter. Be sure to 
view a vector chromaticity indicator or a video monitor when the adjustment is performed. 

21. Aperture level adjustment [AP GAIN]

Press the [RIghT] or [LEfT] button to adjust the image quality. When the level indicator moves in the "+" direction, the image 
becomes sharper, and when the level indicator moves in the "–" direction, the image becomes softer. Be sure to view a video monitor 
when the adjustment is performed.

Note:

  •  Moire (interference fringes) may be observed when shooting a subject with fine pattern such as a carpet or a curtain. In such a 

case, move the indicator in the "-" direction to reduce moire. 

22. Pedestal level adjustment [PEDESTAL] 

Press the [RIghT] or [LEfT] button to adjust the pedestal level of the camera. When the level indicator moves in the "+" direction, 
the image becomes brighter, and when the level indicator moves in the "–" direction, the image becomes darker. Be sure to view a 
waveform monitor or a video monitor when the adjustment is performed. 

23. Display Settings [DISPLAY] 

Move the cursor to "DISPLAY", and press the [RIghT] or [LEfT] button to change display settings.

OFF:

 Alarm display is disabled.

ALARM

 (default)

:

 Alarm display is activated. 

 

MOTION DET

 

Alarm display (“MOTION DET”, “SCENE CHANGE”)

24. Pixel compensation [PIX OFF] 

flaws of pixel in the displayed camera image are corrected. Up to 16 points can be corrected. 
follow the procedure below. 

"SPECIAL SETUP" screen

   **SPECIAL SETUP**

CHROMA GAIN   ....I..160

AP GAIN       ..I.... 20

PEDESTAL      .I..... 15

              -     +

PIX OFF

DISPLAY       ALARM

CAMERA RESET  PUSH SET

 SER.NO. XXXXXXXX

COMMUNICATION COAX

 RET TOP END

Содержание WV-CF614 Series






























Отзывы: