25
Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
Note:
• If the top screen of the setup menu is
called up with the operation buttons, the
setup mode is always "DISABLE" to
prevent operation errors.
To perform settings in the setup menu,
change the setup mode to "ENABLE".
• The cursor is a reversely highlighted part.
Step 4
Perform the settings for each item.
•
Selection of setting item:
Press the [UP] or [DOWN] button to move
the cursor.
•
Change of settings:
Press the [RIGHT ] or [LEFT ] button.
•
Display of advanced setup screen:
Press the [SET] button when " " is
attached to the target setting item.
•
Return to previous setup screen:
Move the cursor to "RET" and press
the
[SET] button.
•
Return to the top screen:
Move the cursor to "TOP" and press the
[SET]
butt
on, to display the top screen
of the setup me
nu.
Step 5
Move the cursor to “END” and press the [SET ]
button to return to the camera image screen,
or wait about 5 minutes and the setup menu
will automatically close.
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR LOW
VMD OFF
RET TOP END
D&N(ELE) OFF
