12
Major operating controls and their functions
(This illustration represents WV-CF634E.)
1
Video output connector
Transmits composite video signals.
2
Mark
This mark is used when the dome cover is
installed.
3
Lens
4
Focus knob
CF634
5
Zoom knob (with lock function)
Locks the zoom position after zoom
adjustment.
6
Tilting lock screw
Fixes the tilting position.
7
AF button [AF]
page 20.
8
Setup button [SET]
Hold down the [SET] button for more than 2
seconds and the setup menu will be
displayed.
•
[LEFT] / [RIGHT]: Press the [RIGHT] or
[LEFT] button to move to the right or left in
the menu, or change the displayed values.
• [UP] / [DOWN]: Press the [UP]
or [
DOWN]
button to move up or down in the menu.
• [SET]: Press this button in the menu to
confirm the selected value or function. In
addition, this button is used to open
submenus.
G
F
1
2
3
4
5
6
7
8
9
A
B
C
D
E
<
9
Adjustment monitor output jack
Connect the adjustment monitor (small LCD
monitor, etc.) to the adjustment monitor
output jack to adjust the camera angle.
@
Panning table lock screw [LOCK]
Locks the panning position after
adjustment.
A
Azimuth adjuster
Adjusts the azimuth angle of the camera.
B
Tilting table
Adjusts the tilting position of the camera.
C
Panning table
Adjusts the panning position of the camera.
D
Cable access hole
E
Power cord
Supplies 24 V AC or 12 V DC from an
external power source.
F
Dust guard cap
A rubber cap which prevent dust go into the
camera through the cable access hole.
G
Fingerplate
This is where to put your fingers when
removing the dome cover.
