22
<Error notification>
When an error occurred, content of the error will be displayed in the message area and the back-
light will also light.
Example:
No remaining capacity in the internal
memory:
“! MEM FULL” is displayed
The battery is in an insufficient charge
state:
“! BATT LOW” is displayed
Note:
•
The “! BATT LOW” indication can be turned off by pressing the Display button on the camera
twice.
The first time lights the backlight of the LCD again. The second time returns the LCD indication
to “READY”.
<Status display>
Displays the status of the camera.
Example:
During recording:
Less than 10 hours:
“REC9:59:59”
More than 10 hours:
“RECORDING”
LED/LCD off mode:
“COVERT”
<Other display information>
•
QR code reading display: “QR CODE”
Displays when reading of QR code started.
•
Upgrade display: “F/W UPGRAD”
Displays when upgrading of firmware started at the time of startup.
•
Data recovery display: “RECOVERING”
Displays when the file system is being recovered.
•
Safe mode display: “SAFE-MODE”
Displays when it is in the safe mode.
•
Battery authentication error display: “ BATT BAD”
Displays when a battery authentication error occurred.
•
System reset: “RESTARTING”
Displays when the system is being restarted by the system reset.
