15
Precautions for installation
Do not place this product in the following
places:
•
Locations where a chemical agent is used
such as a swimming pool
•
Locations subject to moisture or oil smoke
such as a kitchen
•
Locations that have a specific environment
that is subject to an inflammable atmo-
sphere or solvents
•
Locations where a radiation, an X-ray, a
strong radio wave or a strong magnetic
field is generated
•
Locations near coasts directly subjected to
sea breezes, or locations subject to corro-
sive gases such as from hot springs, vol-
canic regions, etc.
•
Locations where the temperature is not
within the specified range (–20 °C to +50 °C
{–4 °F to +122 °F})
•
Locations subject to condensation as the
result of severe changes in temperature (In
case of using the product in such loca-
tions, the lens may become foggy or con-
densation may be caused on the lens.)
Sulfurization caused by rubber products
Do not place the product near rubber products
(packing, rubber feet, etc.) that contain sulfur.
There is a risk that sulfur components in rubber
products may cause electrical parts and termi-
nals, etc. to become sulfurized and corrode.
Radio disturbance
When this product is used near TV/radio
antenna, strong electric field or magnetic field
(near a motor, a transformer or a power line),
images may be distorted and noise may be
produced.
Panasonic i-PRO Sensing Solutions Co., Ltd. assumes no responsibility for injuries or
property damage resulting from failures arising out of improper installation or operation
inconsistent with this documentation.
For information about the installation tasks, refer to Installation Guide on our support
web site.
