65
■
Baud Rate
Select the communication speed for data transmission
with a connected device from the following.
2 400/4 800/9 600/19 200/38 400 bps
Default:
9 600
■
Data Bit
The data bit will be displayed. It is impossible to
change the value for this setting.
8 (bit)
■
Parity
Select a method to check a transmission error at com-
munication from the following.
None:
No parity check
Even:
Even parity
Odd:
Odd parity
Default:
None
■
Stop Bit
Select a stop bit from the following.
1 bit/2 bit
Default:
1 (bit)
■
Retry Timing
Select a retransmission interval for when data reception
is not confirmed from the following.
Off/100 ms/200 ms/400 ms/1 000 ms
Default:
Off
■
Alarm Data
Select a method to inform the connected controller of
an event occurrence from the following.
Off:
Does not function.
0s:
Informs the controller every time an event is detect-
ed.
1s/5s:
Informs the controller when a specified time has
passed after detecting an event.
Default:
1 s
■
Camera Number Setup
It is possible to assign a number to each camera chan-
nel to operate cameras using the controller compatible
with PS·Data.
Do the following to assign numbers to the camera chan-
nels.
(1) Move the cursor onto "Set" next to "Channel No."
and press the [SET] button.
The "Channel No." menu will be displayed.
(2) Assign a camera number (to be operated using the
controller) for each camera port using the camera
selection buttons.
(3) After completing the camera number assignment,
move the cursor onto [OK] and press the [SET] but-
ton.
1
Port
001
Cam
Cam
3
003
5
005
7
007
9
009
11
011
13
013
15
015
2
002
4
004
6
006
8
008
10
010
12
012
14
014
16
016
Port
Camera Number Setup
OK
Cancel