■
Troubleshooting
Phenomenon
Cause
What to do
No power is supplied.
Power cord connection is insufficient.
Securely plug the cord into AC outlet and AC
inlet..
HDD access lamps blink.
The Inner connector is loosening.
Securely plug the inner connector.
Thermal error. OPERATE indicator
lights in orange.
Extension HDDs are not recog-
nized.
Ventilation openings or fan is blocked.
Cooling fan failed.
Remove obstacles.
Consult your dealer for the replacement.
SCSI ID setting
Set ID number properly.
Termination
Set termination properly.
SCSI cable
Use the supplied cable & connect it securely.
Power-on sequence
Turn on peripherals first, then HD500!
HDD unit position
Install HDD unit to the right position.
Ambient temperature is too low.
Use the unit 5 °C to +45 °C.
■
Specifications
Required Power:
220 V - 240 V 50 Hz
Power Consumption:
55 W (inclusive of 4 HDD units if installed)
Interface:
SCSI-2 (FAST SCSI) Half-pitch 50/pin D-Sub
Operating Temperature:
+5 °C to +45 °C (41 °F to 113 °F)
Dimensions:
420 mm (W) x 88 mm (H) x 350 mm (D), rubber feet exclusive
16-9/16” x 3-7/16” x 13-13/16”
Weight:
WJ-HDE500: 7.3 k
g
(16 lbs)
WJ-HDE505: 8.0 k
g
(17.6 lbs)
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
■
Accessories
Power Cord ...................................................................... 2 pcs.
SCSI Cable ....................................................................... 1 pc.
Rack Mounting Bracket..................................................... 2 pcs.
Bracket Fixing Screw ........................................................ 4 pcs.
NM1000-0
V8QA5622AN
Printed in Japan
N
19
2000
© Matsushita Communication Industrial Co., Ltd. All rights reserved.
Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 530-91, Japan