Panasonic WJ-PR204, Руководство по эксплуатации

Страница: 20 / 60

8. Mounting and connections
• Do not mount camera side units above or below other camera side units. This
can cause transmission interference. When mounting several camera side units
in the same area, mount them side by side each other.
• When connecting the coaxial cable to the unit, make sure that no other devices
are connected to the coaxial cable. Connecting the coaxial cable to the unit when
there are other devices connected (such as an analog CCTV camera), may
cause damage to the connected device.
9. Sulfurization caused by rubber products
Do not store or install any rubber products (such as gaskets or rubber feet) that
contain sulfer near or in the same container as this product. Sulfuric compounds in
the rubber product may cause sulfuric corrosion of this product’s electrical
components or terminals, leading to malfunction.
10. Shielded (STP) LAN cables must be used with this unit to ensure compliance
with CE standards. (WJ-PR204E/WJ-PR201E/WJ-PC200E)
11. Make sure to remove this product if it will no longer be used.
20 Operating Instructions
1 Preface