Panasonic WJ-PR204 Скачать руководство пользователя страница 2

Important information

WARNING:

•  To prevent injury, this apparatus must be 

securely attached to the floor/wall/ceiling in 
accordance with the installation instructions.

•  To prevent fire or electric shock hazard, do not 

expose this apparatus to rain or moisture.

•  The apparatus should not be exposed to drip-

ping or splashing and no objects filled with liq-
uids, such as vases, should be placed on the 
apparatus.

•  All work related to the installation of this prod-

uct should be made by qualified service per-
sonnel or system installers.

•  The installation shall be carried out in accor-

dance with all applicable installation rules.

•  The connections should comply with local 

electrical code.

•  The mains plug or an appliance coupler shall 

remain readily operable.

CAUTION:

•  Any changes or modifications not expressly 

approved by the party responsible for compli-
ance could void the user’s authority to operate 
the equipment.

•  The network camera is only intended for a con-

nection to an ethernet or PoE network without 
routing to the outside plant.

•  Before attempting to connect or operate this 

product, please read the label on the bottom.

The model number and serial number of this 
product may be found on the surface of the 
unit.
You should note the model number and serial 
number of this unit in the space provided and 
retain this book as a permanent record of your 
purchase to aid identification in the event of 
theft.

 Model 

No. 

 Serial 

No.

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

We declare under our sole responsibility that the product 
to which this declaration relates is in conformity with the 
standards or other normative documents following the 
provisions of Directives 2006/95/EC and 2004/108/EC.

Wir erklären in alleiniger Verantwortung, daß das Produkt, 
auf das sich diese Erklärung bezieht, mit den folgenden 
Normen oder normativen Dokumenten übereinstimmt. 
Gemäß den Bestimmungen der Richtlinie 2006/95/EC 
und 2004/108/EC.

Nous déclarons sous notre propre responsabilité que le 
produit auquel se réfère la présente déclaration est conforme 
aux normes spécifiées ou à tout autre document normatif 
conformément aux dispositions des directives 2006/95/CE 
et 2004/108/CE.

Nosotros declaramos bajo nuestra única responsabilidad 
que el producto a que hace referencia esta declaración 
está conforme con las normas u otros documentos 
normativos siguiendo las estipulaciones de las directivas 
2006/95/CE y 2004/108/CE.

Noi dichiariamo sotto nostra esclusiva responsabilità che 
il prodotto a cui si riferisce la presente dichiarazione 
risulta conforme ai seguenti standard o altri documenti 
normativi conformi alle disposizioni delle direttive 
2006/95/CE e 2004/108/CE.

Wij verklaren als enige aansprakelijke, dat het product 
waarop deze verklaring betrekking heeft, voldoet aan de 
volgende normen of andere normatieve documenten, 
overeenkomstig de bepalingen van Richtlijnen 2006/95/
EC en 2004/108/EC.

Vi erklærer os eneansvarlige for, at dette produkt, som 
denne deklaration omhandler, er i overensstemmelse 
med standarder eller andre normative dokumenter i følge 
bestemmelserne i direktivene 2006/95/EC og 2004/108/
EC.

Vi deklarerar härmed vårt fulla ansvar för att den produkt till 
vilken denna deklaration hänvisar är i överensstämmelse 
med de standarder eller andra normativa dokument som 
framställs i direktiv nr 2006/95/EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota 
tämä ilmoitus koskee, noudattaa seuraavia standardeja 
tai muita ohjeellisia asiakirjoja, jotka noudattavat 
direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet som denne 
erklæringen gjelder for, er i overensstemmelse med følgende 
normer eller andre normgivende dokumenter som følger 
bestemmelsene i direktivene 2006/95/EC og 2004/108/EC.

For Europe

NOTE: This equipment has been tested and 
found to comply with the limits for a Class A digi-
tal device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when the 
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed 
and used in accordance with the instruction man-
ual, may cause harmful interference to radio com-
munications.
Operation of this equipment in a residential area 
is likely to cause harmful interference in which 
case the user will be required to correct the inter-
ference at his own expense.

FCC Caution: To assure continued compliance, 
(example - use only shielded interface cables 
when connecting to computer or peripheral 
devices). Any changes or modifications not 
expressly approved by the party responsible for 
compliance could void the user’s authority to 
operate this equipment.

For U.S.A.

For U.S. and Canada:
WJ-PR204 / WJ-PR201 / WJ-PC200
For Europe and other countries:
WJ-PR204E / WJ-PR201E / WJ-PC200E

For use only with power supply Panasonic, 
UP0651S-57PB

2

Operating Instructions

Important information

Содержание WJ-PR204





























































Отзывы: