WJ-HD616/716 Quick Guide Local Operation
3
Ver.1.0
Local Access (Via USB Mouse)
Operations of the Operation Panel
When right clicking the mouse, the operation
panel representing the front panel (Monitor
control and camera selection buttons on the
front panel) of the recorder will be displayed.
Multi-screen – Press this button to cycle through available multi-screen patterns
OSD – Press to turn ON/OFF the on screen display information showing camera title, time date etc.
Sequence – Press to turn ON/OFF camera display sequence operation
Monitor – Press to choose between which monitor you want to operate - Monitor 1 and Monitor 2
Move the mouse cursor over a button or tab
then click the left mouse button to select the
operation.
If no mouse action is performed within 3sec
the mouse cursor will disappear. The mouse
cursor will reappear when the mouse is
moved.
Operations of the Sub Menu
The submenu can be displayed by clicking [S Menu] button on the status bar
This submenu window is the same
menu that is displayed when
operating the buttons on the front
panel.
Menu Selection – Click any of the menu buttons. The panel of the selected menu will be
displayed
Close the Submenu Window – Click the [X] in the upper right corner.
Tab Selection – Click using your mouse on the desired tab
Move the position of the panel – click the position button. Each successive click will move
the window clockwise to each corner of the monitor
Operation on the panel – Panels can be operated by clicking the various tabs on the panel
including the arrow buttons
Close Panel – Click on the [X] upper right corner of each panel
Numeric Buttons – Selects the camera for viewing on monitor
