14
Major operating controls and their functions
Front view
About the [INITIAL SET] button
After turning off the power of the unit, turn on the power of the unit while holding down this button,
and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes after
releasing the button. The unit will start up and the settings including the network settings will be ini-
tialized. Before initializing the settings, it is recommended to copy down the settings in advance.
ACT
LINK
Network Video Encoder
WJ-GXE500
SD CARD
ERROR
10BASE-T/100BASE-TX
OPERATE
10BASE-T/100BASE-TX
ACT
LINK
OPERATE
WJ-GXE500
SD CARD
ERROR
Operation indicator
INITIAL SET button
Access LED (blinking at accessing)
Link LED (lighting at linking)
SDHC/SD memory card error LED
SDHC/SD memory card slot
<Behind the SDHC/SD memory card slot cover>
Network connector
LAN cable (category 5 or
better, straight (NTSC model) /
category 5 or better, straight,
STP (PAL model))
