Panasonic WH-UD03JE5, Руководство по эксплуатации

Страница: 35 / 652

35
MAINTENANCE
User
•
In order to ensure optimal performance of the units, user may inspect and clear any obstruction on the air inlet and outlet
vents of the outdoor unit.
• Users should not try to service or replace parts of the unit.
• Contact authorised dealer for scheduled inspection.
Dealer
• In order to ensure safety and optimal performance of the units, seasonal inspections on the units, functional check of
RCCB/ELCB, fi eld wiring and piping have to be carried out at regular intervals by authorised dealer.
•
Speci fi c to the Sanitary Water Tank, it is important to service the Water Filter Set periodically.
Sanitary Water Tank
Indoor unit
• Do not splash water directly.
Wipe the unit gently with a soft dry cloth.
To ensure optimal performance of the system, cleaning has to be carried out at regular intervals.
Consult an authorised dealer.
•
Disconnect the power supply before cleaning.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40 °C.
Water fi lter
• Clean the water fi lter at least once
a year. Failure to do so may cause
the fi lter to clog up, which may lead
to system breakdown. Consult an
authorised dealer.
• Please also remove dust on the
magnet.
Water Filter Set
Outdoor unit
• Do not obstruct the air inlet and outlet vents. Failure
to do so may result in low performance or system
breakdown. Remove any obstruction to assure the
ventilation.
• When it snows, clean and remove snow around the
outdoor unit to prevent the air inlet and outlet vents from
being covered with snow.
For extended non-use
• The water inside the Sanitary Water Tank should be
drained.
•
Disconnect the power supply.
Non serviceable criteria
Disconnect the power supply
then please consult an authorised dealer under the
following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the Remote
Controller.
•
Water leaks from the indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes excessively warm.
0.2
0.4
0.3 0.1
MPa
bar
2
1 3
4
Water pressure gauge
•
Do not press or hit the glass cover using
hard and sharp objects. Failure to do so
may cause damage to the unit.
•
Ensure that the water pressure is
between 0.05 and 0.3 MPa (0.1 MPa =
1 bar).
•
In case the water pressure is out of the
above range, consult an authorised
dealer.
EN
Cleaning instructions
Menus / Cleaning instructions