40
Reference
Receiver unit replacement
(Consult your dispenser)
1
Holding the main unit, pinch the plug of
the receiver unit with an anti-skid pad*
to detach the receiver unit from the main
unit. Do not twist or pull too hard.
2
Insert the plug of the receiver securely into
the main unit as indicated in the figure
below. Make sure that the receiver unit is
facing in the right direction.
Receiver units are available in sizes 0, 1, 2 and 3. If your receiver does not fit properly, then consult your dispenser.
Receiver unit
Anti-skid pad
Main unit
* Anti-skid pads are not included in the package.
Plug of the
receiver unit
Main unit
· Use only the supplied receiver unit. Use of other receivers may cause hearing damage.
· Make sure that the battery has been removed when inserting or removing the receiver unit.
CAUTION
