Sensor detection method
Pyroelectric infrared sensor (heat sensor) and motion detection
Sensor detection range
R
Heat sensor (when the surrounding temperature is approx. 20 °C)
Horizontal: approx. 63°, vertical: approx. 20°, detection range: approx.
5 m
R
Motion detection sensor
Horizontal: approx. 53°, vertical: approx. 41°
Lighting method
2 white LED lights
IP rating
Adjustable mounting angles
Horizontal: ±90°, vertical: facing forward - facing down approx. 60°
(adjustable when mounting)
Heat sensor adjustable angles
Manually adjustable to 2 angles
Power supply unit (VL-PS241) (indoor use only)
Power source
Input: 220-240 V AC, 0.2 A, 50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions (mm) (height
´
width
´
depth)
Approx. 104
´
100
´
54 (excluding protruding sections)
Mass (weight)
Approx. 215
g
Operating environment
Ambient temperature: approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
*1 The minimum illuminance required when the camera’s [Brightness] setting is set to [+3].
*2 Approx. 8.5 lx when 3 m in front of the camera, and approx. 4 lx when 3 m away and 20° to the left or right of the
camera.
*3 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation
Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly exposed
to water or rain.
Note:
R
Design and specifications are subject to change without notice.
R
Names, company names, product names, software names, and logos mentioned in this manual are trademarks
or registered trademarks of the companies concerned.
8
