6.1 System conditions and limitations
Please note the following system conditions and limitations.
R
Only one call or monitoring session can be handled at a time.
Subsequent calls will disconnect the current call (if the current call has lower priority), or will not be connected (if
the current call has higher priority).
Low priority
Monitoring
Medium priority
General calls (lobby to main monitor, main monitor to terminal, etc.)
High priority
Emergency calls
R
All calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
The default time is 90 seconds for calls and 180 seconds for monitoring.
Emergency calls are limited to 10 minutes.
6.2 Lobby station operations
6.2.1 Calling a resident
Entering a room number
1.
Enter the resident’s room number.
2.
Press
M
N
to call.
Searching by first letter of the name
1.
Press
M N
.
2.
Use the keypad to enter the first letter of the resident’s name.
R
Press a key repeatedly to scroll through the letters assigned to that key.
R
Note the hints displayed at the bottom of the screen.
3.
Press
M N
or
M N
to search for the desired name.
4.
Press
M
N
to call.
Searching through all names
1.
Press
M N
.
2.
Press
M N
or
M N
to search for the desired name.
3.
Press
M
N
to call.
6.2.2 Calling a receptionist
1
Press
M N
.
2
Press
M N
or
M N
to search for the receptionist.
3
Press
M
N
to call.
6.2.3 Opening the door by entering an unlock code
1
Press
M
#
N
.
2
Enter the 4-digit unlock code.
3
Press
M
N
.
60
6. . Basic Operations
6. Basic Operations
