![background image](http://html1.mh-extra.com/html/panasonic/vl-sdm100bx/vl-sdm100bx_operating-instructions-manual_4208013012.webp)
Displayed when the battery life of the Wireless Camera is low.
Signal/battery status
To view the signal and remaining battery power of the Wireless Camera:
1
Press
M
MENU
N
, then select
“
SIGNAL/BATT
”
by pressing
MFN
or
MEN
.
2
Press
M
N
(Monitor button) (
“
OK
”
).
3
Press
MEN
(renew) to display the latest signal status and remaining battery power information.
4
To finish the operation, press
M
MENU
N
2 times.
Note:
R
The
M
MENU
N
button will light in red to inform you when the signal is weak or if the remaining battery
power is running low. If the
M
MENU
N
button is pressed at this time, the light goes out and the signal/
battery status screen is displayed. Take the appropriate action, such as exchanging the batteries, after
checking the information displayed.
Signal status symbols
Strong
Weak
Out of range
*1
*1
*1 Use within this range.
Note:
R
When the Wireless Camera is out of range, move the Monitor to an area with a stronger signal.
Remaining battery power symbols
Full
Low
Out of power
*1
*1
*1 Use within this range.
Note:
R
When the batteries of the Wireless Camera run out of power, replace them with new batteries
(page 16).
R
When the Wireless Camera is
(Out of range), the remaining battery power symbol of the Wireless
Camera is not displayed on the Monitor.
12
Getting Started
Содержание VL-SDM100BX
