Doorphone
10
Answering a call
When you receive a call from a door station, the main monitor station rings. You can monitor the visitor on the
monitor display before answering a call.
{
DOOR KEY
}
{
MENU
}
{
TALK/OFF
}
{
PLAY
}
{
MONITOR
}
Microphone
1
When a ringer tone is heard, press
{
TALK/OFF
}
.
L
appears on the display.
2
Speak to the visitor within 50 cm of the microphone.
L
Speak alternately with the visitor.
(If you and the visitor speak at the same time, you will not hear each other.)
3
To end the conversation, press
{
TALK/OFF
}
.
Note:
L
If you do not answer a door call within 30 seconds, the display will turn off.
A conversation will be automatically disconnected in about 90 seconds and then the display will turn off.
L
The image taken by the door station is automatically recorded (page 14).
When using an additional door station:
L
When you receive another call from the other door station during a conversation, see page 12.
Answering a call by voice sensor (Voice answer mode)
This mode allows you to answer a call by voice without pressing
{
TALK/OFF
}
.
Voice answer must be set “ON” beforehand (page 21).
1
When a ringer tone is heard, answer with a clear voice such as “
Yes?
” or “
Hello?
”.
L
When a beep sounds, you can talk to the visitor.
Note:
L
Make sure you are within about 50 cm of the main monitor station.
L
The visitor cannot hear your initial reply when you answer with voice.
L
Your initial reply should be brief (less than 1 second), otherwise the voice answer mode will not start.
L
If a visitor calls you, a loud, brief sound (such as a dog’s bark) may start the voice answer mode even though
you have not replied by voice.
SV30BX̲OI.indb 10
SV30BX̲OI.indb 10
2010/10/22 17:21:46
2010/10/22 17:21:46
Содержание VL-MV30BX
Страница 31: ...31 Notes ...