Enter
Setting
User
Engineer
Click on the [Settings] key on the main interface, and
input the password, the system will show the system
setting interface.
This function is used for setting user parameters.
The default password is 123456.
This function is used to set the engineer parameters.
The default password is 999999.
6.5 Description of alarm parameter settings
6.4 Description of display settings
Volume
setting
The ring tone, ring back tone, ring tone volume and
keypad Tone can be set in this interface.
6.3 Description of intercom account settings
Settings
Arm
delay
time
In security parameter settings, user can set the arm
delay time, alarm delay time, Alarm Repeat Time(s),
(s), remove setting, absent setting, home settings, etc.
This time generally represents the time from the
moment when the user performs the arming operatio-
non tomoment when the devices start to monitor
the zone. Generally, the time lasts from the moment
of arm setting to the moment when the user steps
out of the house ( The default value is 60 seconds).
Display
setting
Others
Date, time, language, brightness,these can be set on
this interface.
The user can press the [Gain the Time] key to acquire
time from the service software or guard machine.
6.2 General description of user parameter settings
16
15
Alarm
delay
time
Repeat
Time
Remove
setting
Absent
setting
Home
setting
This time generally represents the time from the
moment when the zone of the type [Delay] triggers
alarm to the moment when an alarm relay occurs.
Usually, this time lasts from the moment when the
user steps into the house (trigger the door magnet
and the infrared) to the moment when the devices is
operated to be disarmed (The default value is 60 seco-
nds)
This time represents the time from the moment
when an alarm is triggered in a certain zone to the
moment when an alarm is triggered again within the
time period, without alarming operation.
Usually, this time applies to the infrared zone (The
default value is 60 seconds).
This parameter represents whether the device alarm
sounds on removal.
This function allows setting of zones to be monitored
when user is at home.
The setting method is the same as that of the Absent
settings.
This function allows setting of zones to be monitore-
d when user is absent. Click on the [Absent] key, sel-
ect zones to be monitored on the setting interface,
and then the setting is completed.
6.6 Description of volume settings
Doorbell
Setting
In this function, user can set the doorbell’s ring tone,
ring volume and intercom volume of the doorbell.
User
password
The user’s password can be set on this interface.
The default password is 123456.
6.7 Description of password settings
