background image

4

Important Information

Additional safety information

1. Use only the power source marked on the unit. If you are not sure of the type of

power supplied to your home, consult your dealer or local power company.

2. Use only the specified AC adaptor.
3. Do not tamper with the plug.
4. Make sure the plug is securely inserted.
5. Do not touch the plug with wet hands.
6. Do not place objects on the power cord. Install the unit where no one can step or trip

on  the cord.

7. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an

authorized service center when service is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect reassembly can
cause electric shock when the unit is subsequently used.

8. Unplug this unit from power outlets and refer servicing to an authorized service

center when the following conditions occur:
A. If smoke rises, or an unaccustomed noise or smell is discharged from the unit.
B. If metal objects have been dropped inside the sub monitor station.

9. Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker

may cause hearing impairment.

10. Only a qualified technician is allowed to connect a power cable to the unit.

Contact an authorized service center.

11. Do not make any wiring connections when the power supply is turned on.
12. Never install wiring during a lightning storm.
13. Do not connect a power cable other than the specified voltage.
14. Do not connect the power cable to any terminal other than the one specified.
15. When existing chime wires are used, it is possible that they contain AC voltage.

Electric shock or unit damage could result. Contact an authorized service center.

16. Never touch the inside of the sub monitor station. High voltage is present.
17. Make certain when mounting the unit to any wall surface that the method used will

hold the weight of the unit properly.

18. If the wiring is outdoors, use a protection tube or a surge protector.
19. If the wiring is underground, do not make any connections underground.
20. WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This

Apparatus To Rain Or Moisture.

21. WARNING – Unplug this unit from power outlets if it emits smoke, an abnormal

smell or makes unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped and contact an authorized service center.

Note:

This product has a fluorescent lamp that contains a small amount of mercury. It also contains
lead in some components. Disposal of these materials may be regulated in your community
due to environmental considerations. For disposal or recycling information please contact
your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org.>

Содержание VL-GM001





















Отзывы: