7
・Do not install the product in locations that are suspect to sudden
changes in temperature. Failure to do so may cause condensati-
on to form on the product causing malfunction.
・In areas surrounded by a high electrical field, disturbances may
occur in the product's image or sound.
2.6 Disclaimer
・ Recorded data may be altered or deleted as a result of incorrect
operations, exposure to static electricity, accidents, malfunctio-
n,repairs or other operations. To the maximum extent permitted
by applicable law, Panasonic assumes no liability for any direct
or indirect damages resulting from the loss or alteration of
recorded data.
・ To the maximum extent permitted by applicable law, Panasonic
assumes no responsibility for injuries or property damage resul-
ting from failures arising out of improper installation or operati-
on nconsistent with this document.
・ To the maximum extent permitted by applicable law, Panasonic
will not be held responsible for any damage or loss due to non-
performance or delay in performance, error or failure of network
and/or any products.
・ Before attempting to connect or operate this product, please
read the nameplate on the bottom or rear of the product.
・ When you leave the product unused for a long period of time,
unplug it from the power outlet.
・ If you stop using this product, remove it from the walls to prev-
ent it from falling off.
2.7 Other important information
・ When power fails, this product cannot be used.
・ Panasonic may not be liable for damages due to external factors
such as power failures.
8
・The recorded images may be lost when:
‒ Mishandled
‒ Electric shock or radio wave interference occurs.
‒ The power is turned off during use.
・ In the event of problems, you should contact your equipment
supplier in the first instance.
・ After removing the product and any included items from the
packaging, store, dispose, or recycle the packaging as necessary.
Note that certain types of packaging may be a suffocation or
choking hazard.
2.8 General Information
3.Discription of external view
3.1 Front view of the product
3.2 Interface Description
Power interface: It can be connected to DC12~ 27V, and support
SPOE power supply.
Network interface: It is used for connection between the equipment
and the network, and provides 10/100M self-adaption.
