26
Introduction and Installation
To attach the power cable
L
While pressing on the button with a pointed object such as a screwdriver, insert the power
cable into the terminal.
L
To disconnect the power cable, press on the button while pulling out.
L
To attach an optional power cable, cut off about 12 mm of the cable cover (
1
), then push
in firmly until the end of the cable is securely inserted into the power connection terminal
(
2
).
To attach the wires
L
Strip off of the wire cover so that about 9 mm of the wire is exposed.
L
While pressing on the button with a pointed object such as a screwdriver, insert the wire into
the terminal connector.
L
To disconnect a wire, press on the button while pulling out.
Monitor station
DC terminal
1
2
Power cable cross section
Button
Terminal connector
Button
Terminal
connector
12 mm
Correct
Incorrect
Button
Terminal connector
G201CE(E).book Page 26 Friday, November 11, 2005 4:46 PM
