F
AQs
75
Problem
Causes / Actions
Screen
Chaotic image, noisy
Set [P-NR] in the Picture Menu to remove noise.
(p. 28)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
No image can be
displayed
Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?
(p. 28)
Blurry or distorted image
(no sound or low volume)
Reset channels.
(p. 36, 37)
Unusual image is
displayed
Turn the TV off with Mains power On / Off switch, then turn it on again.
If the problem persists, initialise all settings.
[Shipping Condition] (p. 47)
Sound
No sound is produced
Is “Sound mute” active?
(p. 9)
Is the volume set to the minimum?
Sound level is low or
sound is distorted
Sound signal reception may be deteriorated.
Set [MPX] (p. 30) in the Sound Menu to [Mono]. (Analogue)
Unusual sound from the
TV
When power is on, drive noise may be heard from inside the TV (not a sign of
faulty operation).
HDMI
Sound is unusual
Set the sound setting of the connected equipment to “2ch L.PCM”.
Check the [HDMI1 / 2 Input] setting in the Sound Menu.
(p. 31)
If digital sound connection has a problem, select analogue sound connection.
(p. 71)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly.
(p. 66)
Turn the TV and equipment off, then turn them on again.
Check an input signal from the equipment.
(p. 72)
Use equipment compliant with EIA/CEA-861/861D.