Displaying PC Screen on
TV
●
Advanced
55
PC menu setting
■
To make settings
●
“How to Use Menu Functions” to (p. 31)
Menu
Item
Adjustments / Configurations (options)
Picture
Advanced Settings
R-Gain
Adjusts the white balance of bright red area
G-Gain
Adjusts the white balance of bright green area
B-Gain
Adjusts the white balance of bright blue area
R-Cutoff
Adjusts the white balance of dark red area
G-Cutoff
Adjusts the white balance of dark green area
B-Cutoff
Adjusts the white balance of dark blue area
Gamma
Switches the gamma curve
(S Curve / 1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Please note the numerical values are reference for the adjustment.
●
Reset to Defaults
Press the OK button to reset to the default Advanced Settings
Setup
PC Setup
Input Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
●
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
●
Clock
Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
Adjust after Clock adjustment
●
Set to the minimum level if noise occurs
●
Sync
Chooses another synchronous signal if the image is distorted
(H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
●
On Green : by the green signal from your PC (if available)
Reset to Defaults
Press the OK button to reset to the default PC Setup settings
Other items
●
p. 32 - 37
Note
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using
●
HDMI cable (p. 93).
