27
Input signal that can be displayed
Control with VIERA Link
HDMI connections to some Panasonic equipment allow you to enjoy the easy playback.
Setup the equipment to enable this function. Read the manual of the equipment.
Switch the TV until on again with the equipment on when connection or setup is changed.
This function may not work normally depending on the equipment condition.
The equipment can be operated by TV’s remote control with this function on even if TV is in Standby
mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when the input mode is switched.
Easy playback is also available by using the remote control from Amplifier or Player theatre.
Read the manual of the equipment.
Mark : Applicable input signal for Component (Y, P
B
/C
B
, P
R
/C
R
) and HDMI
Signal name
Horizontal frequency (kHz)
Vertical frequency (Hz) Component
HDMI
525 (480) / 60i
15.73
59.94
*
*
525 (480) / 60p
31.47
59.94
*
*
625 (576) / 50i
15.63
50.00
*
*
625 (576) / 50p
31.25
50.00
*
*
750 (720) / 60p
45.00
60.00
*
*
750 (720) / 50p
37.50
50.00
*
*
1,125 (1,080) / 60i
33.75
60.00
*
*
1,125 (1,080) / 50i
28.13
50.00
*
*
Note
Signals other than the above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Applicable input signal for PC is basically compatible to VESA standard timing.
PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with
sufficient clarity.
Signal name
Horizontal frequency (kHz)
Vertical frequency (Hz)
640 × 480 @60 Hz
31.47
59.94
800 × 600 @60 Hz
37.88
60.32
852 × 480 @60 Hz
31.47
59.94
1,024 × 768 @60 Hz
48.36
60.00
1,366 × 768 @60 Hz
48.39
60.04
PC
(D-sub 15P)
TX-26LE8A_0091_EN1.indd 27
TX-26LE8A_0091_EN1.indd 27
7/16/08 2:21:47 PM
7/16/08 2:21:47 PM
