W
atching External Inputs
24
Operating the equipment with the TV remote control
The Panasonic equipment connected to the TV can be directly operated with the below buttons of this
TV remote control.
BD/DVD
TV
BD/DVD / TV switch
Switch to BD/DVD to operate Panasonic DVD Recorder, DVD Player,
Player theatre, Blu-ray Disc theatre or VCR
Switch to TV to operate USB HDD / SD Card Recording, Media Player or
VIERA Link equipment
“Using USB HDD / SD Card recording” (p. 54)
“Media Player” (p. 66)
“VIERA Link Control” (p. 84)
POWER
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operation
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track, title or chapter
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track, title or chapter
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
CH
Programme Up / Down
Select programme
REC
Record
Start recording
Setting your remote control to operate Panasonic VCR, DVD, etc.
1
Switch to BD/DVD
BD/DVD
TV
2
Press and hold
POWER
during the following operations
Enter the appropriate code.
(see table below)
jkl
ghi
mno
tuv
pqrs
wxyz
abc
def
Press
Type of the equipment
Code
DVD Recorder / DVD Player
70 (default)
Player theatre / Blu-ray Disc theatre
71
VCR
72
Note
•
Confirm if the remote control works correctly after changing the code.
•
The codes may be reset to default values if batteries are replaced.
•
Some operations may not be possible on some equipment models.