Tuning and Editing Channels
36
[Auto Tuning]
- Set all Digital TV channels automatically
1
Start Auto Tuning
2
Settings are made automatically
Digital TV Auto Tuning
All digital TV tuning data will be erased
CH 5
Searching
CH
Channel Name
Type
Quality
Digital TV: 4
Radio: 0
Digital TV Auto Tuning
Scan
Digital TV
TV Finland
32
1
This will take about 3 minutes.
69
Digital TV
TV Finland
32
1
Digital TV
SVT HD
32
1
Automatically retune
all Digital TV channels
received in the area.
•
All the previous tuning settings are erased.
•
When the operation is completed, the channel at channel position [1] will be displayed.
•
Search begins in the order from the lower channels to the higher channels.
•
If tuning has not been done completely
[Manual Tuning] (see below)
[Manual Tuning]
- Set Digital TV channel manually
Normally use [Auto Tuning] or [Update Channel List] to update Digital TV channels on your channel
list. If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
[CH21]
10
10
No.
Channel Name
Type
New
Digital TV: 0
Radio: 0
0
0
Digital TV Manual Tuning
Frequency
Signal Quality
Signal Strength
474,00
MHz
select frequency
start scan
select offset
•
All channels found will be added to the Digital TV Channel List.
[Update Channel List]
- Update channels automatically
You can add new channels, delete duplicated channels, update channel name and position
automatically to Channel List.
69
CH 5
Searching
CH
Channel Name
Type
Quality
Digital TV Update Channel List
Scan
Digital TV: 0
Radio: 0
This will take about 3 minutes.
•
Channel List is updated while keeping your settings in
[Favourites Edit], [Channel List], [Child Lock], etc.
•
Depending on the signal condition, the update may not work
properly.
[New Channel Message]
- Display a notification message
Selects whether to give a notification message when a new Digital TV channel is found.
[Off] / [On]
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
•
Selecting OK will perform [Update Channel List].
[Signal Condition]
- Check Digital TV signal
Selects a channel and checks the Digital TV signal condition.
•
To change the channel
CH
101 DZFinfokanal
0 2 4 6 8 10
Wenvoe
[CH32] 562.00 MHz
Digital TV Signal Condition
Signal Quality
Channel Name
Signal Strength
Network Name
Parameter
These bars show the maximum signal value of the
selected channel.
A good Signal Strength is not an indication of suitable signal for
Digital TV reception. Please use the Signal Quality indicator as
follows:
[Signal Quality]:
•
Green bar Good
•
Yellow bar Poor
•
Red bar Bad (Check the aerial)
th̲l42e30g̲s̲eng̲0625.indb 36
th̲l42e30g̲s̲eng̲0625.indb 36
2011/03/09 13:32:39
2011/03/09 13:32:39
