Panasonic Viera TH-65PX600, Руководство по эксплуатации

Страница: 5 / 63

8 9
Quick Start Guide
Connection
ANT IN
ANT OUT
S-Video
OUT
Video
OUT
Audio
OUT
L
R
Video
IN
Audio
IN
L
R
Connection
(Continued)
Ŷ
Watching TV
Back of the unit
S-Video signals have
priority.
or
VHF/UHF Antenna
DVD Recorder /
VCR
Fastener
•
To unfasten
AC cord
(Connect after all the
other connections.)
Note
•
All cables and external equipment shown in this book are not supplied with the TV.
•
For additional assistance, visit us at : www.panasonic.com
www.panasonic.ca
•
The S-Video input will override the composite video signal when S-Video cable is connected.
Connect either S-Video cable or Video cable.
•
When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be
output through the PROG.OUT terminals.
•
Some programs contain a copyright protection signal to prevent VCR recording.
•
When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video
signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the
other TV monitor.
•
Set the TV channel to CH3 or CH4 for using Cable Box Connection.
Video recorder
with TV Tuner
To record TV shows
or
CableCARD™
Ŷ
Fixing connection cables and AC cord
AC cord
Connect power plug to
the socket of the main
body.
Fix the AC cord in
Cable clamper.
How to fix:
Fix by pushing
in until a clicking
sound is heard.
Example of “connection cable routing”
Cable clamper
Snap open
•
Do not bundle the RF cable and AC cord together (could
cause distorted image).
•
Fix cables with Cable clampers as necessary.
•
When using the optional accessory, follow the option’s
assembly manual to fix cables.
Remove from the TV unit
Push both side
hooks and pull out
Cable Binding Instructions
Ŷ
Attaching the cable clampers
(Pedestal accessory)
F-Type
Antenna
Adapter
CableCARD TM Connection
CableCARD TM allows you to tune digital and high definition cable channels through the cable antenna.
Consult your cable company on the availability of CableCARD TM .
1. Connect the cable antenna to ANT connector.
2. Turn the TV on (see page 15).
3. Set the input mode to TV (see page 26).
4. Insert the CableCARD
TM (with upper side facing you) as far as
it will go into the CableCARD TM slot on the back of the TV.
Follow the messages displayed on the screen.
Note
•
If you experience front panel control or remote control function hang-up when using CableCARD TM , unplug the
TV and plug it back on and try the controls again. If this condition persists, please call Panasonic Customer Call
Center for further instructions.
•
Do not insert a PCMCIA card into CableCARD TM slot.
Back of the TV
Insert mark (e.g.)
Upper side of the card facing you
The CableCARD
TM
design varies
depending on the manufacturer.
)
How to release:
Pull up while
drawing the knob.
Snap shut
Cable TV
(