Panasonic Viera TH-58PE75U, Руководство по обслуживанию

Страница: 13 / 134

6.13. Remove the stand brackets
and rear mounting metals
1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screw (×2
each).
3. Remove the rear mounting metals (left, right) fastening
screws (×4 each).
4. Remove the stand brackets and rear mounting metals.
5. Remove the fastening screws (×4 each).
6. Remove the stand brackets from rear mounting metals.
6.14. Remove the C1-Board
1. Remove the tuner unit. (See section 6.4.)
2. Remove the stand bracket (right) and the rear mouting
metal (right). (See section 6.13.)
3. Remove the flexible cables holder fastening screws (×8
).
4. Disconnect the flexible cables (CB1, CB2, CB3, and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×6
) and remove the C1-Board.
6.15. Remove the C2-Board
1. Remove the tuner unit. (See section 6.4.)
2. Remove the flexible cables holder fastening screws (×8
).
3. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
4. Disconnect the flexible cables (C20, C21 and C22).
5. Remove the screws (×6
) and remove the C2-Board.
6.16. Remove the C3-Board
1. Remove the tuner unit. (See section 6.4.)
2. Remove the stand bracket (left) and the rear mouting metal
(left). (See section 6.13.)
3. Remove the flexible cables holder fastening screws (×6
).
4. Disconnect the flexible cables (CB9, CB10 and CB11).
5. Disconnect the flexible cable (C32).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (×5
) and remove the C3-Board.
13
TH-58PE75U