Panasonic Viera TC-P50UT50, Руководство по обслуживанию

Страница: 19 / 97

19
9.2. Disassembly Procedure for the Unit
9.2.1. Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (
×
4 ).
3. Slide the Pedestal stand to the downside and remove the
Pedestal stand.
9.2.2. Remove the Stand bracket cover
1. Remove the screws (
×
4 ) and remove the Stand
bracket cover.
9.2.3. Remove the AC cord clamper B
1. Remove the screws (
×
2 ) and remove the AC cord
clamper B.
9.2.4. Remove the Bluetooth module
1. Remove the screw (
×
1 ) and remove the Bluetooth
module.
9.2.5. Remove the Rear cover
1. Remove the screws (
×
12 ,
×
10 ,
×
2 ).
2. Remove the M8 caps (
×
4 ).
3. Remove the Rear cover.
9.2.6. Remove the AC inlet
Caution:
To remove AC inlet wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the connector (P9).
2. Remove the screws (
×
1 ,
×
1 ) and remove the AC
inlet.