22
Menu
Item
Adjustments / Configurations (alternatives)
Sound
Mode
Selects basic sound mode
(Music / Speech / User)
The selected mode affects all input signals.
●
Music : Improves sound quality for watching music video, etc.
Speech : Improves sound quality for watching news, drama, etc.
In Music and Speech mode, you can adjust “Bass” and “Treble” settings,
●
and those settings will be stored for each mode.
User : Adjusts the sounds manually by using the equalizer to suit your
favourite sound quality.
For the User mode, “Equalizer” will appear on the Sound Menu
●
instead of “Bass” and “Treble”. Select the “Equalizer” and adjust
the frequency. “Equalizer” (below)
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Equalizer
Adjusts the frequency level to suit your favourite sound quality
This function is available when “Mode” is set to “User”.
●
Select the frequency and change the frequency level by using the cursor button.
●
If you want to enhance the bass sound, raise the level of the lower frequency. If
●
you want to enhance the treble sound, raise the level of the higher frequency.
To reset the levels of each frequency to the default settings, select the
●
“Reset to Defaults” by using cursor button, and then press the OK button.
Balance
Adjusts the volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings
(Off / V-Audio)
V-Audio: Provides a dynamic enhancer of width to simulate improved
spatial effects
●
Switching is also possible by the Surround button on the remote control (p. 10).
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance
to Wall
Adjusts the low frequency sound
(Over 30cm / Up to 30cm)
If the back space between the TV and wall is over 30 cm, “Over 30cm”
●
is recommended.
If the back space between the TV and wall is within 30 cm, “Up to
●
30cm” is recommended.
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
For Digital TV mode or Video mode (p. 32)
●
HDMI1 / 2 / 3
Input
Select to fit the input signal
(Digital / Analogue)
(p. 43).
Digital: HDMI cable connection Analogue: HDMI-DVI adapter cable connection
HDMI input mode only
●
Reset to Defaults
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
Содержание Viera TC-P42X20P
Страница 51: ...Licence 51 Technical MEMO ...