Panasonic Viera TC-42P1, Руководство по обслуживанию

Страница: 17 / 148

- 17 -
PC / RGB signal (P1 models only)
1) Set the PC mode and input the white pattern signal from RGB signal generator.
2) Press the Menu button twice to access main menu and set the manual W/B to Cool.
3) Access the Panel W/B mode and align the Low Light and High Light shown below by using color meter.
4) Record R Cutoff, B Cutoff, R Drive and B Drive setting data.(***Data 5)
5) Change the Manual W/B to Normal by the Menu button and ACTION (PT models)/ STR (TC models) button.
6) Modify the Data as follows.
Increase R Drive 34 steps and reduce B drive 2 steps from Cool mode.
7) Change the Manual W/B to Warm by the Menu button and ACTION (PT models)/ STR (TC models) button.
8) Modify the Data as follows.
Increase R Drive 47 steps and reduce B drive 31 steps, and R cutoff and B cutoff 1 steps from Cool mode.
Pos./Size setting (P1 models only)
1) Receive the test pattern signal which can be found the center and edge position and align properly.
Equipment RGB signal generator Color meter
x y
Cool (High) 0.272 0.290
Normal (Mid) 0.288 0.296
Warm (Low) 0.313 0.329
Alignment Item Reference Cool (Hi) Setting/Special feature
Brightness 66 10cd/m
2
by 15% RGB signal (Set by generator)
R Cutoff 91 Set to 15% RGB signal level by the RGB generator.
B Cutoff 85 Set 15% RGB signal level by the RGB generator.
B Drive 6A Set 75% RGB signal level by the RGB generator.
R Drive 74 Set 75% RGB signal level by the RGB generator.
Contrast 84 Optimum setting
R Cutoff B Cutoff B Drive R Drive
Alignment Item Reference Setting/Special feature
H Position 9A Optimum setting
V Position C3 Optimum setting
H Size A8 Optimum setting
V Size 5E Optimum setting