T
imer Programming
44
■
To edit a timer programming event
Select the event
●
To change a timer programming event
Correct as necessary (p. 43)
●
To delete a timer programming event
●
To cancel a timer programming event temporarily
•
Each time pressed:
Timer off: cancel
Timer on: stop cancelling
■
To unlock the tuner and stop recording
Note
●
Check that the LED is orange. If not, timer programming events are not active or not stored.
●
Timer Programming reminder messages will remain displayed until one of the following occurs:
•
You press the OK button to view the programme or the EXIT button to cancel the reminder.
•
The timer programming event that the reminder is set for ends.
●
“!” identifies that two or more timer programming events are overlapped. [USB HDD Rec.] and [SD Card Rec.]
are given priority over [Reminder]. As for the overlapped recording events, the first event starts and finishes as
programmed. The next event can then start.
●
The recording of Timer Programming will automatically change to the programmed channel a few seconds before the
start time.
●
The recording of Timer Programming will be performed even if the TV is in [REW LIVE TV] recording (p. 53) or
[Pause Live TV] recording (p. 79). In this case, [REW LIVE TV] recording or [Pause Live TV] recording will be
cancelled.
C
Y
W
1
2
3
V
●
■
1
●
