Panasonic UF 890 - Panafax B/W Laser, Руководство по обслуживанию

Страница: 29 / 94

29
044 REDIAL COUNT 0 = no redial
~
15 = 15 times Selects the redial count from 0 to 15
times in 1 step intervals.
045 RING DETECT
COUNT
1 = 1 ring
~
9 = 9 rings Selects the ring detection count from 1
to 9 rings in 1 ring step intervals.
046 ON-HOOK TIME 0 = 0 sec.
~
90 = 90 sec. Selects the on-hook time between
sequential communication calls in
1 second step intervals.
047 RESPONSE WAIT 1 = 1 sec.
~
90 = 90 sec. Selects the waiting interval for the
response after completing the dialing.
048
049 Not used
050 RING DETECT MODE 1 = Normal
2 = Rough
Selects the quality of ringer detection.
Use if the line signal is out of regulation,
set to "Rough" so that the unit may
detect the ringing signals.
051 INTERNATIONAL DT
MODE (For Belgium,
France and Spain ver-
sion only.)
1 = Off
2 = On Selects whether to distinguish the 4-digit
international access code prefix.
052 PULSE RATE 1 = 10 pps
2 = 20 pps Selects the dial pulse rate 10/20 pps.
053
054 Not used
055 BUSY TONE CHECK 1 = Off
2 = On
Selects whether to detect the Busy
Tone.
056 DIAL TONE CHECK
(Except for USA and
Canada version)
1 = Off
2 = On Selects whether to detect dial tone
before dialing the telephone number.
057 DC LOOP CHECK
(Except for USA and
Canada version)
1 = Off (will not check)
2 = On (checks) Selects whether the unit checks the DC
Loop during communication.
058 COMM.JRNL +IMAGE 1 = Off (without image)
2 = On (with image)
Selects whether the machine prints the
COMM. Journal with image.
059 CONFIDENTIAL RCV
REPORT
1 = Off (does not print out)
2 = On (prints out) Selects whether the machine prints the
CONFIDENTIAL RCV REPORT.
060 VERSION Indicates the ROM version.
061 TX/RX/PRT/CPY
COUNTER
TX/RX/PRT/CPY Displays the transmitted, received, total
printed and copied document count.
062 PRINT COUNTER 1 = Off
2 = On Selects whether to print in the Fax
Parameter List, the counter information
that is displayed in the Function Param-
eter No. 61.
063
~
067
Not used
Function Parameter Table
No.
Parameter
(see Note 3)
Selections Function