Panasonic UF-7200, Руководство по эксплуатации

Страница: 10 / 62

10
Precaution
• Copyright material or trademarks without the consent of the owner
• Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
Install your machine near a supervised area to prevent illegal copies from being made.
Ventilation
„
The machine should be installed in a well-ventilated area to minimize the ozone density in the air.
Handling
„
Do not disconnect the power cord from the machine or open the Right Cover during copying/
printing.
„
Energy Saver Mode Notice
• When using the Printer Function (USB Local and Network Connections), we recommend that you leave
the Energy Saver Mode in the initial factory default setting (Sleep mode).
„
Key Operator ID Code
• The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes
require the Key Operator ID Code.
„
Dept. (DEPARTMENT) Code
„
Number of Copies
The maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8
digit numbers, they will be interpreted as being a phone number and displayed on the LCD, then the
machine will switch to the Fax mode.
„
Auto Reset Timer
As the initial setting for Auto Reset Time is 1 minute, selected operation mode returns to default operation
mode (Fax) after 1 minute, if you wish to change this Auto Reset Time, set to Fax Parameter No.121 (AUTO
RESET TIME). For more details for Fax Parameter, refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.
For Key Operator: When setting up this machine, please consult with your authorized Panasonic dealer,
and decide on the Key Operator ID Code together, then record it and keep it in a safe
place for future reference.
When the Department Counter function is set up, the Dept. (Department) Code
input screen is displayed on the LCD Display. A registered Department Code (1 to
8-digit) is required to gain access to each secured function, or the secured Fax/
Scanner function(s) cannot be used. Please consult with the Key Operator
regarding the Department Code(s) for the desired function.
1 to 8-digit
Procedures:
(1) Input a registered department code (1 to 8-digit).
(2) Press the SET or START Key.
INPUT DEPT CODE
********