78
8.4.
Replacing the Battery
When the clock battery has been drained, the time-setup screen is displayed each time the unit’s power is turned on.
In this case, replace the battery as follows and set the current time.
1. Loosen the screw attached to the lower side of the Control
Panel 1, then remove the battery holder 2.
2. Remove the old battery and install the new one with the
positive (“+”) terminal upward.
Note:
Always use “CR2032” batteries and be sure that
the battery is inserted as indicated on the battery
holder.
3. Set the battery holder with the battery side upward and
retighten the screw.
4. Set the current time. (See Sec.7.2.1.)
Note:
Dispose of expired battery quickly, by covering the
terminals in tape and following the disposal
regulations in your country/area
.
Содержание UB-5838C
