Panasonic TY-FB12LC, Руководство по эксплуатации

Страница: 4 / 20

Great user manuals database on
UserManuals.info
4
English
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUP
NETWORK SETUP
DISPLAY ORIENTATION
LANDSCAPE
MULTI PIP SETUP
PORTRAIT SETUP
2/2 SET UP
--:--:--:--:--:--
DHCP
NETWORK SETUP
SAVE
0
192.168. 0. 8
255.255.255. 0
192.168. 0. 1
1024
AUTO
RS-232C
OFF
SUBNET MASK
LAN SPEED
GATEWAY
IP ADDRESS
PORT
CONTROL I/F SELECT
NETWORK ID
MAC ADDRESS
DHCP, IP ADDRESS, SUBNET MASK, and GATEWAY settings
1
SetDHCP.
When“OFF”isselected,IPADDRESSandothersettings
can be set manually.
2
Select the item and press .
3
Enter an address.
I
1 92.168. 0. 8
IP ADDRESS
1
Use to select a digit.
2
Use to change a number.
3
Press .
Pressing will cancel the address
change.
4
Select“SAVE”andpress .
PORT setting
1
Select“PORT”andpress .
2
Enter a port number.
I
0 1024
PORT
1
Use to select a digit.
2
Use to change a number.
3
Press .
Pressing will cancel the port
number change.
SAVE
Save the current network Setup. Each value set for
DHCP,IPaddress,Subnetmask,andGatewaywill
besaved.If“NG”isdisplayed,checkthesameIP
address is not used within the same network.
DHCP (DHCP client function)
To obtain an IP address automatically using a
DHCPserver,setthisto“ON”.IfDHCPserveris
notused,setthisto“OFF”.
IP ADDRESS (IP address display and setting)
EnteranIPaddressifDHCPserverisnotused.
SUBNET MASK (Subnet mask display and setting)
EnterasubnetmaskifDHCPserverisnotused.
GATEWAY (Gateway address display and setting)
EnteragatewayaddressifDHCPserverisnotused.
PORT
Set the port number used for command control.
Theavailablesettingrangeis1024–65535.
When the PJLink™ protocol is used, the port
setting is not necessary.
LAN SPEED
Set the connection speed of the LAN environment.
SelectthevaluefromAUTO,10HALF,10FULL,
100HALFor100FULL.
NETWORK ID
Set the ID to identify this unit.
Theavailablesettingrangeis0–99.
CONTROL I/F SELECT
SetwhethertocontrolwithRS-232C(serial)or
LAN.When“LAN”isset,powerindicatorislit
orange when the slot power is turned on, then the
poweristurned“OFF”withremotecontrol(stand-
bystate)regardlessofthe“Slotpower”setting.
MAC ADDRESS
DisplaytheMACaddressofthisunit.However,
the MAC address is not displayed when the
“CONTROLI/FSELECT”issetto“RS-232C”.
Notes:
• TouseaDHCPserver,makesuretheDHCPserverisstarted.
• Contactyournetworkadministratorfordetailsonsettings.
Network Setup
Make the various settings to use the network function.