background image

English

   - 9 -

Power Connection

IMPORTANT

: The TV set is designed to operate on a 

220-240V AC, 50 Hz

 supply. After unpacking, allow the 

TV set to reach the ambient room temperature before 

you connect the set to the mains. Plug the power cable 

to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the aerial input 

(ANT) socket or satellite plug to the satellite input (LNB) 

socket located on the rear side of the TV.

Rear side of the TV

1

2

LNB

ANT

1. 

Satellite

2. 

Aerial or cable

 If you want to connect a device to the TV, make 

sure that both the TV and the device are turned off 

before making any connection. After the connection 

is done, you can turn on the units and use them.

License Notification

The terms HDMI, HDMI High-Definition Multimedia 

Interface, and the HDMI Logo are trademarks or 

registered trademarks of HDMI Licensing Administrator, 

Inc.

Manufactured under license from Dolby Laboratories. 

Dolby, Dolby Audio, and the double-D symbol 

are trademarks of Dolby Laboratories Licensing 

Corporation.

YouTube and the YouTube logo are trademarks of 

Google Inc.
This product contains technology subject to certain 

intellectual property rights of Microsoft. Use or 

distribution of this technology outside of this product 

is prohibited without the appropriate license(s) from 

Microsoft.

Content owners use Microsoft PlayReady™ content 

access technology to protect their intellectual property, 

including copyrighted content. This device uses 

PlayReady technology to access PlayReady-protected 

content and/or WMDRM-protected content. If the 

device fails to properly enforce restrictions on content 

usage, content owners may require Microsoft to revoke 

the device’s ability to consume PlayReady-protected 

content. Revocation should not affect unprotected 

content or content protected by other content access 

technologies. Content owners may require you to 

upgrade PlayReady to access their content. If you 

decline an upgrade, you will not be able to access 

content that requires the upgrade.
The “CI Plus” Logo is a trademark of CI Plus LLP.
This product is protected by certain intellectual property 

rights of Microsoft Corporation. Use or distribution of 

such technology outside of this product is prohibited 

without a license from Microsoft or an authorized 

Microsoft subsidiary.

Disposal of Old Equipment and Batteries

Only for European Union and 

countries with recycling systems

These symbols on the products, 

packaging, and/or accompanying 

documents mean that used electrical and 

electronic products and batteries must not 

be mixed with general household waste.
For proper treatment, recovery and 

recycling of old products and batteries, 

please take them to applicable collection 

points in accordance with your national 

legislation.
By disposing of them correctly, you will 

help to save valuable resouces and 

prevent  any  potential  negative  effects 

on human health and the environment.
For more information about collection 

and recycling, please contact your local 

municipality.
Penalties may be applicable for incorrect 

disposal of this waste, in accordance with 

national legislation.

Note for the battery symbol (bottom 

symbol):

This symbol might be used in 

combination with a chemical symbol. 

In this case it complies with the 

requirement set by the Directive for the 

chemical involved.

Содержание TX-43JS360B





































Отзывы: