Panasonic tx-34p180b, Руководство по обслуживанию

Страница: 17 / 51

6 DEFLECTION ADJUSTMENT
6.1. V-Adjustment / Confirmation (4:3 Mode)
6.1.1. V-CENTER ADJUSTMENT (4:3 MODE)
6.1.1.1. 100iV-POS ADJUSTMENT
1. Receive PAL monoscope pattern E11. (Scan mode = AUTO)
2. Adjust V-POS so that the scale of the top and bottom side is equal.
6.1.2. V-HEIGHT ADJUSTMENT (4:3 MODE)
6.1.2.1. 100i V-AMP ADJUSTMENT
1. Receive PAL monoscope pattern E11. (Scan mode = AUTO)
2. Adjust V-AMP so that B, D (Fig.2) is 2.0 ± 0.1
6.1.2.2. 120i V-AMP ADJUSTMENT
1. Receive NTSC monoscope pattern US13. (Scan mode = 100Hz)
2. Adjust V-AMP so that B, D (Fig. 2) is 2.0 ± 0.1
6.1.2.3. 50p V-AMP ADJUSTMENT
1. Receive PAL monoscope pattern E11. (Scan mode = PROGRESSIVE)
2. Adjust V-AMP so that B, D (Fig. 2) is 2.0 ± 0.1
6.1.2.4. 60p V-AMP ADJUSTMENT
1. Receive NTSC monoscope pattern US13. (Scan mode = AUTO)
2. Adjust V-AMP so that B, D (Fig. 2) is 2.0 ± 0.1
Fig. 17
6.2. H-Deflection Confirmation / Adjustment (4:3 Mode)
6.2.1. H-CENTER ADJUSTMENT (4:3 MODE)
6.2.1.1. 100i H-POS ADJUSTMENT
1. Receive PAL monoscope pattern E11.
2. Set scan mode to AUTO 100Hz.
3. Adjust H-POS so that the horizontal position is center of CRT.
6.2.2. H-WIDTH ADJUSTMENT (4:3 MODE)
6.2.2.1. 100i H-AMP ADJUSTMENT
1. Receive PAL monoscope pattern E11.
2. Set scan mode to AUTO 100Hz.
3. Adjust H-AMP so that both of edges are within A, B = 2.5 ± 0.2.
17
TX-34P180B