5.10. WHITE BALANCE
Item/Preparation
Adjustment Procedure
1.
Select Service Mode 1.
2.
Aging should have been performed over 30 minutes
3.
Receive the white balance pattern.
4.
Picture menu: DYNAMIC NORMAL
AI: OFF
5.
Degauss the CRT face.
6.
Connect the photo sensors of the Colour Analyser to the
CRT.
Note
:
CRT cut off adjustment is completed.
1.
Adjustment of Low Light
a.
Adjustment SUB BRIGHT, so that “Y” axis indicates 6.5
b.
Adjustment R-CUT OFF, so that y axis indicates
0.241 ± 0.005.
c.
Adjustment B-CUT OFF, so that x axis indicates
0.241 ± 0.005.
2.
Adjustment of High Light
a.
Adjust SUB BRIGHT, so that “Y” axis indicates 90.
b.
Adjust R-DRIVE, so that y axis indicates 0.258 ± 0.003.
c.
Adjust B-DRIVE, so that x axis indicates 0.258.
5.11. FOCUS
Item/Preparation
Adjustment Procedure
1.
Receive a cross-hatch pattern signal.
1.
Adjust the Focus to thin all the Lines by Focus 1 Control.
(Prefer to thin the Vertical Lines than Horizontal Line.)
2.
Adjust the Focus to thin the Horizontal Lines by Focus 2
Control.
5.12. GEOMAGNETIC
Item/Preparation
Adjustment Procedure
1.
Demagnetize the GM-Board around its perimeter with the
Demagnetizer.
2.
Set to control:
Geomagnetic.....Auto
1.
Connect a DC voltage meter to TPGM1-2pin (GM-Board)
2.
Adjust the R4863 (GM-Board) so that the Vx Out at TPGM2-
4pin becomes
3.9 ± 0.1 V
3.
Connect a DC voltage meter to TPGM1-1pin (GM Board).
4.
Adjust the R4861 (GM-Board) so that the Vy Out at TPGM1-
4pin becomes
3.8 ± 0.1 V
5.13. SUB BRIGHT
Item/Preparation
Adjustment Procedure
1.
Receive the sub bright pattern.
2.
Picture Menu:
BRT..................CENTER
COLOUR..........CENTER
CONT...............MAX
3.
Connect the photo sensor of the Colour Analyser to the
center of the CRT.
1.
Adjust Sub Bright so that brightness level becomes 1 ± 0.2
cd/m
2
.
16
TX-34P180B
Содержание tx-34p180b
