Panasonic TX-29N20D, Руководство по эксплуатации

Страница: 22 / 32

SET UP
TV/AV
22
Q
--
Link allows the television to communicate with your VCR
Open the Setup menu
Move to Q -- Link
Confirm Q
--
Link is set to “On”
Press the TV/AV button to exit
The VCR must be connected with a SCART lead (full function type) attached between the AV2
socket of the television and the appropriate socket on your VCR. See the VCR handbook for further
information. Q
--
Link,
NEXTVIEWLINK
or similar technology allows the television to instruct a compatible
VCR to record the programme that is currently being displayed on screen, regardless of the
programme position set on the VCR, thus simplifying the process of recording programmes.
To record the programme you are currently watching
Press the DIRECT TV REC button on the remote control
DIRECT
TV REC
If the VCR is off, it will automatically switch on when you press the DIRECT TV REC button.
A message, sent from the VCR, will appear on screen showing what is being recorded, or if it is not
possible to record:
VCR recording preset prog VCR recording TV source
No recording - NO TAPE
No recording - TAPE IS PROTECTED
VCR is recording the programme signal
from its own tuner. If you wish you can
switch off the TV and leave the VCR
recording in the normal way.
VCR is recording the programme signal from the
television.
You must not change programme position or
switch off the TV: if you do, the VCR will
automatically stop recording and switch off.
The write protection tab on the back of the
cassette has been removed.
No recording - VCR IS PLAYING
No recording - ALREADY RECORDING!
No recording - TAPE MAY BE DAMAGED
VCR Recording VCR external No recording - NO SOURCE AVAILABLE
Examples of other messages that might be displayed are:
VCR recording own tuner
Q
--
LINK
Setup menu
AV2 out TV
Teletext List
Off timer Off
Flicker reduction On
Q-Link On
Text language West
Tuning menu
OSD language
Geomagnetic