Panasonic TX-29AK1P, Руководство по обслуживанию

Страница: 4 / 41

HOW TO MOVE THE CHASSIS INTO SERVICE POSITION
1. Remove the bead clamper from the mains lead and affix, using back cover screw, into top right-hand cabinet rib (A),
shown in Fig.3 .
2. Remove 2 screws (B), as shown in Fig.4 , and remove speaker assembly.
3. Hold and lift the rear of the chassis and gently pull the chassis toward you, as shown in Fig.3 .
4. Release the respective wiring clips and rotate the chassis vertically through 90
°
, anti-clockwise.
5. Locate the base of the chassis frame into location (C), shown in Fig.5 / Fig.7 .
6. Clip the chassis frame onto the bead clamper, shown in Fig.5 / Fig.6 .
7. After servicing replace the bead clamper and speaker, and ensure all wiring is returned to its original position before
returning the receiver to the customer.
4
Fig.3.
(A)
Fig.4.
Screws
(B)
Fig.5.
(C)
Fig.7.
Fig.6.