21
English
DVB-C, DVB-T, Analogue
Re-install Channels
1
Select [Antenna/cable installation] > [Search for
channels].
2
Select [Re-install channels].
3
Select the country and press OK.
4
Select [Antenna (DVB-T)] or [Cable (DVB-C)], and
select one item you need to re-install.
5
Select [Digital and analogue channels], [Only digital
channels], or [Only analogue channels].
6
Select [Start] and press OK to update channels. This
can take a few minutes..
Reception test
The digital frequency is shown for the channel. If the
reception is poor, check and reposition your antenna.
Check the signal quality, select [Search].
If you use DVB-C to receive channels, the option
[Symbol rate mode] is available. For Symbol rate mode,
select [Automatic], unless your cable provider gave
you a specific symbol rate value. To enter the specific
symbol rate value, select [Symbol rate], and type in the
value.
Manual Installation
Manually install analogue TV channel if needed.
1
Select [Antenna/cable installation] > [Analogue:
Manual Installation].
■
System
Set up the TV system and select the country.
■
Search Channel
Enter a frequency to find a channel. The found
channel is shown and if the reception is poor, press
[Search] again. Select [Done] and press OK to store
the channel.
■
Fine tune
Select [Fine tune] to fine tune a channel.
■
Store
You can store the channel on the current channel
number or as a new channel number.
Select [Store] and press OK. The new channel
number is shown briefly.
Channel Options
While watching a programme, you can set some options.
1
Select the mode
2
Open options
select
access
■
Subtitles
To switch [Subtitles on] or [Subtitles off]. Alternatively
you can select [Automatic].
If language information is part of the digital broadcast
and the broadcasted programme is not in your language
(the language set on TV), the TV can show subtitles
automatically in one of your preferred subtitle languages.
One of these subtitle languages must also be part of the
broadcast.
You can select your preferred subtitle languages in
[Subtitle language].
■
Subtitles Language
Set the subtitles language. If none of the preferred
subtitle languages are available, you can select another
subtitle language if available.
■
Audio Language
Set the audio language. If none of the preferred audio
languages are available, you can select another audio
language if available.
■
Dual I-II
If an audio signal contains two audio languages but one
language or both has no language indication, this option
is available.
■
Common Interface
If prepaid premium content is available from a CAM, you
can set the provider settings with this option.
■
Mono / Stereo
To switch the sound of an analogue channel to Mono or
Stereo.
■
Status
To view the technical information on the channel.
■
Clock
To display time on the corner of the TV screen.
