7
QUICK START GUIDE
2
Programmes will appear immediately if your dealer has
programmed the TV for you.
If the TV has not been programmed for you then
Auto
setup
will begin. TV stations will be located, sorted into
order and stored ready for use.
*2
1
Ensure that the
VCR is in Standby mode
.
Switch ON your Satellite Receiver
Plug the TV into mains socket and switch ON.
3
Owner ID
As an added feature, this TV has the option of
adding a security code (Owner ID) and personal
details into its memory, so that in the unfortunate
event of theft it will help the Police to trace the
owner.
Enter required 4 digit Owner ID
PIN NUMBER
.
(using 0 to 9 on the remote control).
4
Enter
NAME,
HOUSE
NUMBER
and
POSTCODE.
If a 4 digit
PIN NUMBER
was
entered above, you will be taken automatically
to the
NAME
line.
If not, move to the
NAME
line.
Change character.
Select character position.
Repeat above until
NAME, HOUSE NUMBER
and
POSTCODE
are entered.
Press
“TV/AV”
to store the details.
Press
“TV/AV”
again, when you are asked
“Are you sure ?”
For further information on Owner ID, see page 16.
A space is provided on page 16 to write down the
PIN
NUMBER
for future reference
.
Mains
Socket
*1.
If, after Auto Setup is complete, the programme position of the digital satellite receiver is not to your preference, you can re---arrange
the programme position with the Swap feature. (See page 17 for details.)
*2.
The sorting order depends upon the TV signal, the broadcasting system, and reception conditions. If either BBC1, BBC2 or ITV are
not located, then their respective pre---allocated programme positions (1 to 3) will remain unused.
Programme
Position
All stations
available
No Channel 5
No Channel 5 /
S4C
No Channel 4 /
Channel 5
No S4C
No Channel 4 /
S4C
No Channel 4 / S4C /
Channel 5
1
BBC1
BBC1
BBC1
BBC1
BBC1
BBC1
BBC1
2
BBC2
BBC2
BBC2
BBC2
BBC2
BBC2
BBC2
3
ITV
ITV
ITV
ITV
ITV
ITV
ITV
4
Channel 4
Channel 4
Channel 4
S4C
Channel 4
Channel 5
~
5
S4C
S4C
~
~
Channel 5
~
~
6
Channel 5
~
~
~
~
~
~
Note :
The next available channel will appear, if no other stations are available then the Programme position will remain unused.
