CONNECTIONS
39
Connection D
Good Picture and Sound Quality)
To use this connection you must have:
•
TV with RF input
•
Coaxial cables
To connect TV and antenna or cable box:
1.
Connect coaxial cables as shown.
To receive DSS
®
programming:
•
Tune TV to channel 3 or 4 (depending on how you set
the CH3/CH4 switch on the back of the receiver.
To receive off-air programming (no cable box):
1.
Turn off satellite receiver.
2.
Tune TV to desired channel.
To receive cable programming (with cable box):
1.
Turn off satellite receiver.
2.
Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3.
Tune cable box to desired channel.
VIDEO
DSS
RECEIVER
CABLE
OR
OFF-AIR ANTENNA
L
R
SATELLITE IN
AUDIO
L
IN
R
VIDEO
AUDIO
SATELLITE
DISH
TV
OUT TO TV
IN FROM ANT
CH4
CH3
CAUTION
Do not stack electronic components
or other objects on top of the DSS
Receiver. The slots on top of the
receiver must be left uncovered to
allow proper airflow to the unit.
Blocking the airflow to the unit could
impair performance or damage your
receiver and other components.
Do not stack the DSS receiver on
top of a “hot component” such as an
audio power amplifier.
