24
(From the On screen Display menu)
It is possible on individual programme position.
1
Press to select the Manual tuning.
Press to access the Manual tuning
screen.
2
Press to select the desired
Programme Number.
Press to search the higher or lower
channel.
3
When the desired station is found,
press to store.
The programme position will flash.
4
Press to exit from the Tuning Menu.
This returns the set to the normal
viewing condition.
Tuning menu
Manual Tuning
Manual tuning of the programme position is available either from the On Screen Display menu or from the side panel
controls.
Turn this set on and select the broadcast channel. Follow the step on the previous page to display the Tuning menu
screen.
Decoder (AV2)
Volume correc.
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Tuning menu
Access
Auto
Off
Helpful Hint
(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
“Colour System Selection” operation on page 27.
(2) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to programme No. ‘0’. In that case,
perform manual tune after setting the colour system in advance. Further, in multi-system VCR, it is more convenient
to set the designated channel to several programme Numbers.
02 99:21 41
Manual tuning
TV/AV
’STR’ Button Store
E x i t
Serch
down / up
Programme
down / up
Return
Search Start.
(Via Top panel)
1
Press
F
(Top panel) until Tuning mode is reached.
2
Press
or
to access Tuning mode.
3
Press
TV AV
to move between Change programme, search
and TV system.
4
Press
or
to change programme position or
start search.
When the desired station is found, press
STR
to store.
The programme position will flash.
Repeat above procedure to tune additional programme
positions.
Press
F
at any time to exit the Tuning menu.
STR
F
TV AV
1
2, 4
3
4
N
?
1
2
3
4
5
6
7
C
8
9
0
TV/AV
STR
Manual tuning
-, +
: Search
TV/AV : Move cursor
STR
: Store
F
: To exit
02 99:21 41