55
SD Security
Inserting a specific SD Memory Card can work as an alternative to entering password in the cases below. Format the card
and make the necessary settings.
Starting up the computer
Logging on to Windows
Resuming the computer from standby, hibernation or screensaver
NOTE
If you are unable to use the SD Memory Card, you can enter the Supervisor or User Password to start up the com-
puter, then log-on to Windows using your log-on password.
This function works only with the SD Memory Card slot. It does not work with other devices such as an SD card
reader/writer connected through USB port.
You can use the setup SD Memory Card as an ordinary card on the computer and other devices.
You can use a single setup SD Memory Card for multiple computers. However, when using the card to log on to Win-
dows, you need to use the same logon user and the same password on all of the computers. The security functions
set on this SD Memory Card cannot be used on CF-W2, CF-T2 and CF-Y2 series.
Preparation
To use to start up the computer
Set the Supervisor Password in the Setup Utility (
). (You can also set it during the configuration procedure.)
To use to log on to Windows or to resume from standby, hibernation or screensaver.
Set the Windows logon user and the password in [Control Panel] in advance. For further information, refer to the Windows
Help.
1
Log on to Windows as an administrator.
2
Insert the formatted SD Memory Card in the SD Memory Card slot.
If [Secure Digital storage device] appears, click [Take no action], then click [OK].
3
Click [start] - [All Programs] - [Panasonic] - [SD Card Setup].
4
Click [Next] in the Welcome screen.
SD Card Setup
