37
Troubleshooting
Starting Up
“Remove disks or
other media. Press
any key to restart”
or a similar mes-
sage appears.
A floppy disk is in the drive and it does not contain system
startup information. Remove the floppy disk and press any
key.
If a device is connected to the USB port, disconnect the
device, or set [Legacy USB Support] to [Disabled] in
the [Advanced] menu of the Setup Utility. (
Refer-
ence Manual
“Setup Utility”)
If the problem persists after having tried the above solu-
tions, it may be a flash memory failure. Contact Panasonic
Technical Support (
page 54).
Windows startup
and operation is
slow.
Press
+
(F9) in the Setup Utility
(
Reference
Manual
“Setup Utility”)
to return the Setup Utility settings
(excluding the passwords) to the default values. Start the
Setup Utility and make the settings again. (Note that the
processing speed depends on the application software, so
this procedure may not make Windows faster.)
If you installed a resident software after purchase, turn off
the residence.
Disable the pop-up menu and Input Panel Tab.
A
Open the Input Panel, and click [Tools] - [Options] -
[Opening].
B
Remove the check mark of [Show the Input Panel tab]
and click [OK].
Disable Indexing Service in the following menu.
Click [start] - [Search] - [Change preferences] - [With
Indexing Service (for faster local service)].
