33
PC Card / ExpressCard
You can insert the following cards.
z
ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A)
z
PC Card Type
I
(3.3 mm) or
II
(5.0 mm) to the PC Card slot (B)
NOTE
z
The following types of card are not supported:
PC Card Type
III
(10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards
that require 12V of operating voltage.
Preparation
Before connecting a card, first determine the media that contains the card driver (e.g., CD-ROM), then attach the
device for that media to the multimedia pocket. Once the installation screen for the card’s driver appears, equipment
you then connect to the multimedia pocket will not be recognized.
To insert the card
1
Open the cover (C), and insert the ExpressCard (D) or the PC
Card (E) with the label side up until it securely fits in to the slot.
z
For further information, refer to the instruction manual of the card.
To remove the card
1
Disable the card function.
A
Double-click
on the notification area and select the card, then click [Stop].
B
Follow the on-screen instructions.
z
This step is not necessary when removing the card after turning off the com-
puter.
2
Open the cover and remove the card.
A
Press the eject button (F). The eject button pops out.
B
Press the eject button (F) again so the card comes out of the slot.
C
Draw the card straight out.
Inserting/Removing the Card
