Panasonic Toughbook CF-52GUNBX2B Скачать руководство пользователя страница 50

Страница: 50 / 85

Modem

CAUTION

You cannot connect the modem to the following lines.
• Interphone
• Intercoms
• ISDN

Be sure to connect the telephone cable into the modem port, not into the LAN port.

Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.

Open the cover (A), and connect the computer and the
telephone jack (B) using the telephone cable
(included) (C).

Hold the cable so that the shape of the connector (D) matches the
port, and insert fully until it clicks.

Click (Start) - [Control Panel] - [Connect to the Inter-
net] - [Dial-up] and change the settings as necessary.

NOTE

Do not enter sleep or hibernation during communications.

To remove the cable, press and hold the lever and pull out.

Connecting the Internal Modem with a Telephone Jack

Содержание Toughbook CF-52GUNBX2B






















































































Результаты поиска

Содержание Toughbook CF-52GUNBX2B

Отзывы:

Похожие инструкции для Toughbook CF-52GUNBX2B

Бренды по названию

Популярные бренды

Panasonic Toughbook CF-52GUNBX2B, Справочное руководство

Результаты поиска

Содержание Toughbook CF-52GUNBX2B

Отзывы:

Похожие инструкции для Toughbook CF-52GUNBX2B

Бренды по названию

Популярные бренды