13
English
2
Remove the four screws of the installation adaptor, install the
installation adaptor, and tighten it using the mounting nut.
1
Remove the four
screws.
2
Tighten the installation
adaptor using the
mounting nut.
Installation adaptor
Mounting nut
3
Loosely tighten the screws,
and loosen the mounting nut.
1
Loosely tighten
the screws (x4).
2
Loosen the mounting nut until a
3 mm to 4 mm
clearance forms between the mounting nut and
main unit.
4
While pushing the main unit up, install it onto the faucet.
1
Tighten the two rear screws by
hand until they touch the pipe
in such a way that the pipe
is positioned in the center of
the installation adaptor
.
2
Use a screwdriver
to tighten the two
remaining screws.
Pipe (faucet)
Rear
screws
Installation
adaptor
Remaining
screws
5
Turn the mounting nut manually, and
tighten it securely.
Important
●
Do not use a tool to tighten up the mounting nut.
(Doing so may damage the mounting nut.)
●
Do not turn the main unit to tighten up the
mounting nut. (Doing so will apply a powerful force
to the thread, possibly damaging the main unit.)
Upon completion of installation, check that the main unit does not easily rotate
and that there is no play.
TK6305P̲OI̲(EN).indd 13
TK6305P̲OI̲(EN).indd 13
2010/10/06 18:13:50
2010/10/06 18:13:50
